The European market for personal protective clothing, such as cold clothing, anti electric clothing, anti high temperature clothing, anti freezing clothing, chemical corrosion clothing, anti ionization clothing, complete isolation clothing, etc., requires CE certification mark
CE mark is a compulsory certification mark for some products in the European market in terms of basic health and safety requirements. The European Commission has set basic requirements for protective clothing, and standards are harmonized across the European economic region
all manufacturers of protective clothing in Europe or outside Europe must meet the requirements of CE marking to enable the products to circulate in the European market. Therefore, European consumers think that CE mark is the symbol of product performance and quality assurance
certification standard of protective clothing:
en342: protective clothing – cold proof whole or coat
en343: protective clothing – rain proof
en348: protective clothing – Test Method: to determine the impact behavior of small metal marble with melted material
en381: protective clothing for people holding chain saw
en373: protective clothing – resistance of material to molten metal spatter
en381: protective clothing for people holding chain saw />
en470-1: protective clothing for welding process – Part 1: General requirements
EN471: highly visible protective clothing for professional use – Test methods and requirements
en510: protective clothing with entanglement risk when moving
en531: protective clothing for workers exposed to heat sources (except protective clothing for fire fighters and welding workers)
en533: protective clothing – protective clothing against heat and flame – Limited En943-1: protective clothing against liquid and gaseous chemicals, including liquid smoke and solid particles – Part 1: performance requirements for ventilated and non ventilated impermeable chemical protective clothing
en943-2: protective clothing against liquid and gaseous chemicals, 1ncluding liquid smoke and solid particles – Part 2: performance requirements of airtight chemical protective clothing for emergency teams
en1073: protective clothing against radiation pollution
en1082: protective clothing gloves and arm protective clothing against hand knife cutting and stabbing
en1149: anti-static clothing
EN1150: protective clothing visual clothing for non professional use
en1486: protective clothing Protective clothing for firefighters – Test methods and requirements for reflective materials made for professional firefighters
en1621: protective clothing for mechanical collision prevention
en13034: protective clothing for personal chemicals
en13158: protective clothing – protective jacket for rider, body and shoulder protection
en13546: protective clothing – hands, arms, chest of Field Hockey Manager, Abdominal, foot and genital protection and tibial protection for athletes in sports fields – Requirements and test methods
en13567: protective clothing – hand, arm, chest, abdomen, leg, genital and facial protection for fencers – Requirements and test methods
en13595: protective clothing for professional motorcyclists – jacket, Pants and one or more uniforms
en13998: aprons, pants, vests, etc. resistant to hand knife cutting
en14058: protective clothing – cold environment protective clothing
en14120: protective clothing – wrist of users of roller sports equipment, Hand and elbow protective clothing – Requirements and test methods
en14126: protective clothing – Performance requirements and test methods of protective clothing for infectious substances
en50286: current insulated protective clothing for low voltage installation
en60895: normal voltage up to 800 V on site ± Application process of 600kV Conductive Clothing certification:
for anti electric clothing, anti high temperature clothing, anti freezing clothing, anti chemical corrosion clothing, anti ionization clothing, complete isolation clothing, etc, The general certification process is as follows:
the manufacturer submits samples and technical data â?
the laboratory of the certification body tests â?
the auditors of the certification body come to the factory for audit â?
all pass, issue certificates â?continuous supervision every year
for other protective clothing, The general certification process is as follows:
the manufacturer submits the samples and technical data â?
the laboratory of the certification body conducts the test â?
the test is passed, and the test report and certificate are issued â?
the manufacturer pastes the CE mark
we solemnly declare that this article is reproduced in the network media, only represents the author’s point of view, and has nothing to do with this website. 1f the information column articles and comments violate your legal rights, please call to let us know and we will deal with them in time