PPE

Both safety shoes and labor protection shoes are important for foot safety protection

The selection and use of protective shoes

(1) in addition to selecting the suitable type according to the working conditions, the protective shoes should also fit the feet and make people feel comfortable. This is very important, and the appropriate shoe size should be carefully selected

(2) the protective shoes should have anti-skid design, not only to protect people’s feet from injury, but also to prevent the accident caused by the operator slipping

(3) all kinds of protective shoes with different performance should meet the technical indexes of their respective protective performance, such as toe not being injured, sole not being stabbed, insulation and conduction. But safety shoes are not everything

(4) before using protective shoes, it is necessary to carefully check or test them. 1n electrical and acid-base operations, damaged and cracked protective shoes are dangerous

(5) the protective shoes should be kept properly after use, and the rubber shoes should be washed with clean water or disinfectant and dried to prolong the service life

anti smashing shoes and steel shoes are the same kind, that is, safety shoes to protect the toes

safety shoes and labor protection shoes are both for foot safety protection, which means the same. There are many kinds of it, such as toe protection, puncture prevention, insulation, acid and alkali resistance, etc

safety shoes use specification

oil proof shoes are used in places with oil spill or floor area; Waterproof shoes are used in workplaces with water accumulation or splashing on the ground; Cold proof shoes are used to protect the feet of low temperature workers from frostbite

stab resistant shoes are used for sole protection to prevent stabbing by various sharp and hard objects

the main function of anti smashing shoes is to prevent feet from being injured by falling objects. The front end of the shoe is made of impact resistant material

the main function of steel-making shoes is to prevent burning and cutting. They should be able to withstand a certain static pressure and temperature, and not flammable. This kind of shoes is suitable for smelting, furnace, cast iron, etc

in addition to the above, there are some special shoe covers, such as canvas, asbestos, aluminum film, etc

the selection and maintenance of protective shoes should be carried out according to the hazard nature and degree of the working environment. Protective shoes shall have product certificate and product manual. Before use, the manual should be read according to the conditions of use, and the use method should be correct. Special protective shoes should be checked and kept clean after use, and stored in a non polluting and dry place

Back to list