Mechanical protective shoes are protective shoes worn by employees in production and work to prevent foot injury caused by mechanical hazards
classification
at present, the widely used mechanical protective shoes are mainly divided into three categories: toe protection safety shoes, rubber surface anti smashing safety shoes and stab resistant shoes
toe protection safety shoes are equipped with metal or non-metal inner wrap on the toe cap, which has the function of defending against crushing injury caused by external objects
the rubber surface anti smashing safety boots are used in the environment with water or wet ground, and the metal or non-metal inner wrap is also installed on the toe cap, which has the function of defending against the impact and crush injury of foreign objects on the toes
stab resistant shoes are equipped with an anti puncture pad between the inner sole and the outer sole, which has the function of preventing sharp objects from stabbing the sole
selection
the selection can be divided into three steps: selecting the appropriate type and grade, selecting qualified products and checking the appearance quality
choose the appropriate type and grade
1. toe protection safety shoes
toe protection safety shoes are divided into toe protection safety shoes (boots) according to their protective performance. 1n the standard, the main technical performances of toe safety shoes include the pressure resistance of the front end of the finished shoes, the impact resistance of the front end of the finished shoes, the folding resistance of the outsoles, the wear resistance of the outsoles and the peeling strength of the finished shoes. The pressure resistance and impact resistance of the front end of the finished shoe belong to the safety protection performance, while the folding resistance, wear resistance and peeling strength of the insole belong to the wearing performance. Toe safety shoes must meet these technical performance requirements specified in the standard
toe safety shoes can be selected from the following two aspects according to needs:
1. Protection performance:
among the five protection performance levels of toe safety shoes, an1 level is the highest and an5 level is the lowest. High level toe protection safety shoes have high pressure resistance and impact resistance technical indicators at the front end, which is good for toe protection. Therefore, the more easily the toe is injured or crushed, and the more serious the injury is, the higher level toe protection safety shoes should be selected. For some operations, the toe may be injured or crushed, and the injury degree is not too serious, You can choose low-level toe safety shoes. 1t should be selected according to the characteristics of the operation