Daily maintenance of high level protective clothing

Decontamination solution

do not use any oxidizing, corrosive or reactive decontamination solution for protective clothing. Only use water, mild household dishwashing liquid

on site decontamination

the purpose of on-site decontamination is to allow the wearer to take off the protective clothing without being damaged by the pollutants on the surface of the protective clothing. Those protective clothing contaminated or suspected to be contaminated by hazardous chemicals should be decontaminated on site before removal. At the same time, additional cleaning, decontamination, full visual inspection and pressure test should be carried out before using the protective clothing again

1. When leaving the hot area, there should be enough air for use when removing the pollution of protective clothing and taking off the protective clothing. The wearer should continue to wear the respirator until the protective clothing is completely removed and removed

Back to list