DELTA 102008 safety helmet anti-smashing insulation

Ratchet-type adjustable safety helmet
Product Model: 102008
Size : Free Size
Color: Yellow, Red, White
Product Description:
UV-resistant high-density polypropylene safety helmet. The ratchet type can be adjusted downward. Perspiration belt. Size: 53-63cm
knob rear hoop adjustment, equipped with perspiration belt, no air holes on the top, good insulation effect.
Eight-point fabric lining, good shockproof effect.
Colors: orange, yellow, white, blue, red.
Material: Polypropylene (PP)
Weight: 333g
Instructions for use: The
helmet can absorb the energy released by the impact. At this time, the hat will be partially damaged or damage the cap shell and cap liner. Even if the damage cannot be found immediately, it is recommended to replace it. Hard hat hit hard. In order to ensure adequate protection, the helmet should be adjusted to fit the head size. Please note that, except for the parts recommended by the helmet manufacturer, any modification or removal of any original parts may cause danger. The helmet should not be equipped with any accessories not recommended by the helmet manufacturer. It is forbidden to use paints, solvents, adhesives or labels that are not recommended by the manufacturer on the helmet.
Disabled:
In order to ensure effective protection, the visor should be forward (straight direction), through the ratchet adjustment system (size: 53-63cm) at the back of the helmet, adjust the helmet to
fit the size of the head (not too loose or squeezed) Pressure). It is prohibited to use this product under circumstances other than those specified in the above description. The life of the helmet is affected by many factors, such as cold, heat, chemicals, sunlight and improper use. Daily inspections are required to identify the helmets, cap linings and fragile accessories of the helmet for signs of cracks and defects. If the helmet is hit hard or worn, it should be replaced immediately. If there is no defect, the helmet can be used.