Product Number: 102012
Product Name: Safety Helmet
Specification Model: QUARTZI
Product Description: UV-resistant high-density polypropylene (PP) safety helmet. PE (polyethylene) material lining, socket type rear hoop adjustment, sweat wicking belt, adjustable air holes on the top.
Protection standard: in line with European standard EN397 and Chinese GB2811 standard.
Color: yellow, white, blue, orange, red
This helmet can provide protection for the top of the head. After the helmet is hit hard, part of the helmet may be damaged due to the release of energy. It is recommended that the helmet
be replaced immediately after a heavy blow, even if there are no obvious signs of damage.
To ensure that the helmet provides better protection, the user must adjust the helmet according to the head size before wearing it. Please note that the user: unidentified manufacturers, please do not
be free to change or remove any parts of the helmet, while prohibiting the paints, solvents, tape and labels for free to the helmet.
Prohibited: It is
forbidden to use this product under circumstances other than those specified in the above description. Place the helmet on the table. If the top of the helmet is tilted forward or backward, it means that the helmet
can no longer be used and should be replaced immediately. To ensure the helmet provides better protection for the head, the helmet should be adjusted through hoop button to reach the optimum size (that is, not
to be too loose also not too tight).
The service life of the helmet is affected by many factors, such as too cold, too hot items, chemicals, light, overuse, etc. Before each use, the helmet is to check
whether there are any cracks or defects. The production date of the helmet is found inside the helmet. Under normal use, after a single use, the product provides two to three years of protection
guard; valid for five years (from the date of manufacture). This product does not contain any allergic substances. But if people allergic allergic reactions, should immediately leave the danger zone operating
domain, drug treatment.
This product must be placed in a dry, ventilated place when not in use or during transportation, protected from light and frost. When storing, keep away from chemicals and sharp objects.
This product can be cleaned and disinfected with a low-concentration detergent. Do not use corrosive chemical solvents for cleaning.
This product complies with the European Directive 89/686, safe and harmless, comfortable and ventilated. And in line with European standards: EN397:1995/A1/2000 (-20/+50, 440V
AC, LD, MM).
DELTA 102012 helmet anti-smashing and breathable
Product Number: 102012