DELTA 102018 electrician helmet anti-smashing insulating helmet

ABS safety helmet Product model: DIAMONDV (1.02.018)
Size: adjustable
Color: fluorescent yellow, red, blue
Product description:
ABS safety helmet. The design of the baseball cap has been tested by the inner lining reversed installation, and the front view is larger. 8-point high-grade fabric lining, sweat-absorbent belt, button-type rear hoop adjustment. Can be insulated.
Material: ABS material (acrylonitrile-butadiene-styrene)
Weight: 360 grams
Instructions for use:
This helmet can provide protection for the top of the head. After the helmet is hit hard, part of the helmet may be damaged due to the release of energy. It is recommended that the helmet be replaced immediately after a heavy blow, even if there are no obvious signs of damage. To ensure that the helmet provides better protection, the user must adjust the helmet according to the head size before wearing it. Please pay attention to users: please do not replace or remove any accessories of the helmet without the confirmation of the manufacturer. At the same time, it is forbidden to use paint, solvent, tape and labels on the helmet at will.
Prohibited: It is forbidden to use this product under circumstances other than those specified in the above description. Place the helmet on the table. If the top of the helmet is tilted forward or backward, it means that the helmet can no longer be used and should be replaced immediately. In order to ensure that the helmet provides better protection to the head, it should be adjusted by the button on the back of the helmet to achieve the most suitable size (that is, not too loose or too tight). The service life of the helmet is affected by many factors, such as too cold, too hot items, chemicals, light, overuse, etc. Before each use, check the helmet for cracks or any blemishes. The production date of the helmet is found inside the helmet. Under normal use, this product can provide 2 to 3 years of protection after one use; the
validity period is 5 years (from the date of manufacture). This product does not contain any allergic substances. However, if allergic people have an allergic reaction, they should immediately leave the dangerous operation area for medication.
Storage instructions: This product must be placed in a dry, ventilated place when not in use or during transportation, protected from light and frost. When storing, keep away from chemicals and sharp objects.
Cleaning/Maintenance Instructions: This product can be cleaned and disinfected with low-concentration detergent. Do not use corrosive chemical solvents for cleaning.
Performance: This product complies with the European Directive 89/686, safe and harmless, comfortable and ventilated.
And in line with European standards: EN397:1995/A1/2000 (-20/+50,440VAC,LD,MM).