DELTA 105008 silicone full face mask

M9000 series silicone full face mask
Product model: M9300 STRAP (1.05.008)
Important: M9300 STRAP full face mask is the result of years of experience and research in the field of respiratory protection, but only
after carefully studying the following instructions, users can get the best Protect and use this mask safely. DELTA is not responsible for
the losses caused by incorrect use of masks or non-compliance with the product maintenance methods provided by DELTA and its authorized agents
. It must be emphasized that the respirator must be used by a person who has received special training and supervised by a special person. This
person should know the scope of the respirator and the relevant laws of the country where the user is located.
1. Technical description: M9300 STRAP full face mask complies with EN136:98 level 3 standard and consists of the following parts:
-Built-in silicone mask.
-High-definition polycarbonate face screen.
-A combination of BA connector, inhalation valve, two exhalation valves and sound-transmitting diaphragm in the plastic device.
-Small built-in half-mask, silicone, with two circulating ventilation valves to prevent condensation.
-Four-point rubber headband with quick release buckle.
-The strap that wraps the mask around the neck when removing it.
The uniform size of the facial device can be adjusted to completely seal the device without stressing the user.
2, disable: M9300 STRAP full face mask having a standard connector, can be used with all breathing apparatus with a standard male connector (EN148-1) (for example
, such as: gas and particulate filter, gas or compressed air breathing apparatus) .
Please refer to the special instructions provided by the device manufacturer for the use and prohibition of masks with gas and particulate filters, compressed gas or air respirators.
Remarks: -M9300 STRAP full face mask cannot be used as a positive pressure breathing device. Masks with special exhalation valves must be used for this type of respirator.
-M9300 STRAP full face mask cannot be used in conjunction with a closed circulating oxygen breathing device. Masks without an exhalation valve must be used with this type of respirator.
-Those with thick beards and glasses should be careful not to get their hair and beard stuck between the mask and face. If necessary, professional frames can be used.
3. Instructions for use:
3.1 How to wear:
Try to stretch the strap of the headband. Hold the mouth of the mask with both hands, check the strap of the headgear, and adjust the width of the strap at the same time to put your face into the mask. When the chin engaged
when a suitable position, the headband around the head, the strap adjustment buckles detachment in place. Pull the strap until it is snug, but the sealing edge will not press against the face. The trip buckle is
automatically locked into the required position. It is recommended to tighten the cheek strap first, then the temple strap, and finally the forehead strap. The tape is released, light evade shackle, which
like the belt will slip back.
3.2 Check seal air
before entering the dirty air, the best check tightness of the mask and an exhalation valve. Wear a mask, push the standard connector with the palm of your hand, and breathe deeply. The mask
changes its shape slightly and fits tightly to the face to ensure safety. It should be ensured that outside air does not leak into the interior. If a leak is found, release air immediately. After checking the tightness
, the mask can be connected to the filter box and the respirator, so that safe operation can be ensured.
4. Storage, disinfection and cleaning:
The silicone used in the M9300 STRAP full face mask is durable, so there is no need for special protection for the face mask. However, it is recommended to put the new mask in the original packaging and place it in a well-ventilated place away from possible heat sources. The best storage temperature is between 0 and 40C. For ease of use, it is recommended to put the mask in a closed cabinet to prevent dust, sunlight and chemical vapors, and keep it away from heat sources. After use, clean the mask with a soft cloth to wipe off sweat and condensation. If the mask is very dirty, it can be cleaned with the help of a simple dishwasher at a temperature not exceeding 40C and using neutral detergent. When disinfecting the mask, it is recommended to use a disinfectant towel P/N16009000 according to the manufacturer’s instructions to ensure that it will not harm rubber or plastic. Take off the mask during cleaning and disinfection. When cleaning the exhalation valve, take extra care.