DELTA 401005 liquid tight heavy chemical protective clothing

Product name: DELTA polyester acid-proof coveralls | chemical protective clothing | protective clothing
Product model: COMBI80 (4.01.005)
Instructions for use:
All zippers of the work clothes must be completely sealed. After starting to use, the protective effect of the equipment is linked to the integrity of the equipment itself. If there are cracks or tears, you must change this set of equipment.
Color: Orange
Disable:
Do not use the work clothes outside the applicable range (especially do not use it to enter the fire field), pay attention to the permeability of each chemical concentration We have done the test at a certain temperature (see the test table for the results), and we will not bear any responsibility for all accidents caused by use not in accordance with this manual.
Storage instructions: During the
storage process, no part of the equipment should be threatened with deformation and damage. Ensure that the place where the equipment is stored is protected from light, heat, humidity, and chemical dust or steam.
Cleaning/maintenance instructions:
clean after each use: external cleaning: spray on the surface of the work clothes with neutral chemicals: sodium carbonate solution for acid, weak acid solution for alkali. Washing with water If the substance sprayed on the surface of the work clothes is insoluble in water, please use a compatible product according to the instructions of the chemical durability table, and then clean it.
Cleaning the inside:
Use a sponge soaked in washing water (mixed with washing liquid and water) to clean sweat stains, and then rinse again. It is best to disinfect after each use.
In any case, detergents and disinfectants are harmless.
Use hot air to dry (maximum 40 degrees) such as: oven, hair dryer, drying room, etc. to
determine the location of damage to the equipment surface (such as: perforations, wear, cracks, scratches, etc.), these problems are easy to find under natural light during the day.