Flame-retardant and anti-static POLO shirt
Model: POLO FR (4.03.022)
Color: Navy
Size: S/M/L/XL/XXL
Product description:
Flame-retardant and anti-static POLO shirt, 60% polyolefin fiber, 39% Blended with cotton and 1% anti-static fiber, weighing 280 grams, flame-retardant and anti-static.
Material:
60% polyolefin fiber, 39% cotton and 1% anti-static fiber
Instructions for use:
This product can provide industrial workers with fire-retardant and anti-static protection. In order to achieve the best protection, please use it with products of the same performance.
Prohibited: It is
forbidden to use this product outside of the above instructions. Before use, please check to make sure that the product is not dirty or damaged, otherwise the protection performance will be reduced. Check whether the sutures and the placket are in good condition. If any damage is found, please replace them immediately. The service life of this product is affected by many factors, such as frequency of use and working environment. When wearing the product, warranty
card contact with the skin or ground. It is the responsibility of the wearer to choose suitable supporting products to ensure effective protection. In flammable and explosive situations, do not take off this product at will. In addition, if you work in an oxygen-rich environment, you should not wear this product without the permission of the safety supervisor. The anti-static performance is affected by many factors, such as the humidity of the environment (the higher the relative humidity, the better the anti-static performance), the wearing frequency of the coverall, and the state of use. Ensure that the ground resistance is less than 108 ohms. In order to achieve the best anti-static state, please carry out the whole body anti-static protection. Please note that all tests are performed in the laboratory and do not necessarily reflect the actual working environment. This product does not contain any toxic and harmful substances, and it is also suitable for people with allergies. The supplier will not be responsible for any improper use.
Storage instructions: Store
in the original packaging in a dry, cool environment, away from light and freezing.
Cleaning/Maintenance: The maximum cleaning temperature is 60, clean and wring out normally. Chlorine bleaching and the use of drum dryers are prohibited. The highest ironing temperature is 150. Please note: clothing may shrink after washing, so please consider this factor when ordering size selection.
Performance:
This product meets the requirements of European Directive
89/686 , is safe and non-toxic, comfortable to wear, flexible and breathable, and meets the following European standards: -EN340: 2003 (General) At 60C, after 12 washings and natural drying (ISO 5077: 2007-ISO 6330:2002), size change: in line with 3%
-EN14116:2008 (fire and flame retardant clothing)-index 3, the flame does not spread and there is no hole in the flame contact; at 60C , After 12 times of washing and natural drying: 3/12H/60;
-EN1149-5: 2008 (EN1149-3: 2004Test Method 2)(Antistatic PerformancePart 5Requirements, Fabric Performance and Design) : Wash 12 times at a temperature of 60, and then dry naturally: t50 0.01s & S=0.67: Comply with EN14116:2008 Fire and flame retardant clothing 3/12H/60: Fire and flame retardant index (index 1-3)
DELTA 403022 Flame Retardant Anti-static POLO Shirt
Model: 403022
SKU:
PL004245
Category: Flame Retardant Clothing
Description
Additional information
Brand |
DELTA |
---|
Reviews (0)
Be the first to review “DELTA 403022 Flame Retardant Anti-static POLO Shirt” Cancel reply
You must be logged in to post a review.
Reviews
There are no reviews yet.