DELTA 406012 tape chemical protective clothing

Adhesive strip type limited non-woven coverall Product model: DT119 (4.06.012)
Size: L/XL
Color: White
Product description: Adhesive
strip type limited non-woven coverall, elastic hood, cuffs , Ankle opening, rubber strip waterproof sealing suture, anti-dust particles, anti-chemical liquid splash, anti-static, wear-resistant, tear-resistant performance.
Material:
DELTATEK 5000 non-woven fabric
50% polypropylene
50% polyethylene
Instructions
for use: This product is specially used to protect against toxic dry particles and chemical liquid splashes. It can be used in working environments with asbestos and acid-base substances. It is a Class III PPE product, which meets the requirements of European standard 4&5&6 protective clothing. In order to achieve the best protection, it is recommended that the wearer use solvent protective tape on the cuffs and ankle openings. At the same time, please put the same tape on the contact area of the mask and the hood. Protective gloves must cover the cuffs.
Prohibited: It is
forbidden to use this product outside of the above instructions. When taking off the coverall, please avoid the contaminants on the coverall from contacting the human body. This product must not be used for fire and flame retardant protection.
The user is responsible for deciding which protective products and supporting products to use. In flammable and explosive situations, please do not take off the coverall at will. In an oxygen-rich environment, this coverall is not allowed without the permission of the safety supervisor. The anti-static performance is affected by many factors, such as the humidity of the environment (the higher the relative humidity, the better the anti-static performance), the wearing frequency of the coverall, and the state of use. The user must be grounded to ensure the resistance is less than 108 ohms. In order to achieve the best anti-static state, please carry out the whole body anti-static protection. Please note that all tests are performed in the laboratory and do not necessarily reflect the actual working environment. The supplier will not be responsible for any improper use.
Storage instructions: Store
in the original packaging in a dry and cool environment, away from light and freezing.
Cleaning and maintenance instructions:
without any special maintenance requirements, discard after use.
Performance:
This product complies with European Directive 89/686, safe, harmless, comfortable and breathable. It also complies with the following European standards: -EN
340:1993 (general)
-EN 1149-1:1995 protective clothing-anti-static performance-part 1: surface resistivity (test methods and requirements): both sides of the test must pass
-EN 13034: 2005 Resistance to slight chemical liquid splashing-Performance requirements (Type 6)
-EN ISO 13982-1:2004 Resistance to drying solid particles-Part 1: Performance requirements (Type 5) -EN 14605:2005 Protection
against chemical liquids-Performance requirements-Chemical resistance Liquid spray (type 4)
-EN 1073-2:2002 Anti-radioactive particle pollution: Class 1/3
-EN ISO 22610: Wet antibacterial performance: Class 6/6
-ISO 22611: Anti- microbial pollution aerosol penetration performance : Level 3/3