DELTA 501001 economical high-altitude safety belt

DELTA 501001 Economical High-altitude Safety Belt
Full-body Safety Belt
Product Model: HA001 (5.01.001)
Size: Adjustable
Color: Gray
Material: Belt: Polyester Fiber
Description:
Full-body safety belt with back buckle, 45 mm It consists of a polyester fiber strap and 2 anti-corrosion umbrella-shaped buckles that are level with the legs. The buckle can be opened and the seat belt can be easily adjusted. Comply with EN361 standard.
Instructions for use:
This safety device is recommended for high-altitude operations (scaffolding, roofs, glass ceilings and walls, cars, bridges). It is recommended for simple tasks, short-term tasks or rare tasks that require such protection. This device should be as close to the body as possible and not superfluous, which is beneficial to the movement of the user.
Prohibited:
Please do not use the product outside the scope specified above. When in doubt about the firmness of the equipment, please replace the equipment in time. After the fall occurs, please promptly send the product to the manufacturer or its authorized professionals for inspection. This is tested every 12 months, which is performed by the manufacturer or its authorized professionals. The safety device and a seat belt without shock absorption function cannot constitute a complete fall prevention system.
Storage instructions:
Put it in the original packaging and store it in a dry place away from sunlight.
Cleaning/Maintenance Instructions: Clean
with a brush dipped in water and detergent. Then wipe it dry with a dry cloth and place it in a ventilated place. Wipe the metal parts with a cloth soaked in petroleum jelly. The use of bleach and detergent is prohibited. Be sure to check the equipment before use. In particular, avoid the following situations:
Belts: no cracks, burns, rust spots, and abnormal narrowing
stitches: no visible surface damage.
Metal parts: There must be no traces of oxidation or deformation.
Make sure that the performance of other parts such as the snap hook is in good condition.
Performance:
This safety belt complies with the design, production and testing methods specified in the European Directive 89/686 and EN361 standards. Product production strictly complies with the EC Quality Assurance Article
( Article 89/686/EEC Directive 11B), and the following authorized agencies control and are responsible for product production: AFAQ N333, 116 ave Aristide Briand, 92224BAGNEUX.