DELTA 501046 reinforced double-point safety belt and waist belt

Product Model: HA046(501046)
Color: Orange/Gray
Size: Uniform
Product Description:
Double adjustable two-node safety belt (with positioning belt), composed of two-adjustable two-node safety belt HA044 and positioning belt, with double chest and back Hanging point, leg straps are equipped with quick interface, easy to connect and comfortable to wear. Including: double hanging points on the chest and back;
material:
braided belt: polyester fiber
buckle: corrosion-resistant
belt: fabric
weight: 1.95kg
instructions for use:
this product is suitable for high-altitude work wear, please wear the seat belt correctly and adjust it to fit The size of the wearer, it is best to complete the dressing and inspection with the assistance of others. Before each use, please make sure that the
braided belt of the seat belt: no traces of cutting, burning, deformation;
suture: no obvious damage;
metal parts: no deformation or oxidation;
if any abnormality is found, please replace it immediately. It is recommended to equip each user with a separate seat belt. Please read the instructions carefully before each use.
When in use, ensure that the fixed point of the anti-fall system bears at least 10KN, and at the same time, ensure that the user will not swing from side to side when a fall occurs. This product is only for use by trained, skilled and healthy people, or under the guidance of trained and skilled personnel.
Prohibited: It is
forbidden to use this product outside of the above instructions.
Storage instructions: Store the
product in its original packaging, away from light, in a mild, dry and ventilated environment, avoid contact with flames and heat sources, and avoid contact with chemicals.
Cleaning and maintenance instructions:
scrub with soapy water, wipe with a soft dry cloth, and dry naturally in a ventilated room. Wipe metal parts with petroleum jelly, and prohibit the use of any bleach or detergent.
The service life of a seat belt is generally three to five years, but it is affected by factors such as the working environment, use method, and frequency. The safety belt must be checked by the manufacturer or its designated representative, usually after a fall accident or once every 12 months, to ensure the safety of the user. The full-body seat belt without shock absorber does not constitute an anti-fall system, and the D-ring is only for working positioning.
Performance:
This product complies with the design, production and testing methods specified in the European Directive 89/686, and complies with European standards EN361 and EN358.