DELTA 501081 fire fighting sling

Product name: Complete full-body seat belt
Product model: HA081 (5.01.081) HA080 (501081)
Size: Adjustable
Color: Navy/Black
Performance:
This seat belt complies with the design, production and testing of the European Directive 89/686 Methods and EN361, EN358 and EN813 standards. Product production strictly complies with the EC Quality Assurance Article (Article 11B of Directive 89/686/EEC), and the following authorized agencies control and are responsible for product production: AFAQ N333, 116 ave Aristide Briand, 92224 BAGNEUX. CN
description:
This safety belt is made of two-tone 45mm wide polyester fiber belt, including: a belt with side and abdominal buckles, one with the front and chest buckles
, one Heat-formed back support with terry cloth lining, automatic buckle made of light alloy that is level with the leg.
Material:
Belt: polyester fiber.
Instructions for use: The
seat belt can especially prevent deployment: for benchmarking, roof work, etc. The seat belt should be fastened as much as possible on the body, but the free movement of the user should not be excessively restricted. The chest fixing points should be used in pairs to reduce longitudinal pressure if a fall occurs, and to balance the force on both sides as much as possible.
Prohibited: It is
forbidden to use this seat belt in situations other than the use method specified in the above description. If there is any doubt about the quality of product protection, please replace the seat belt. After a fall accident, return the seat belt to the manufacturer or one of its designated representatives for testing. According to regulations, safety belt inspection and control work should be carried out by the manufacturer or its designated representative. A full-body safety belt and a steel cable without shock absorbers cannot form a fall prevention system. The side D-ring is only connected to the operating positioning system.
Storage instructions: The
seat belt should be hung in a mild, dry and ventilated room, away from light and insects.
Cleaning and maintenance instructions:
wash with water and soapy water. Wipe with a dry cloth and place in a well-ventilated room. Wipe the metal parts with a cloth coated with petroleum jelly. Do not use bleach or detergent. The seat belt should be checked before each use, especially the following points:
-The condition of the belt: it is not scratched, burned or shrunk.
-The condition of the seams: no obvious damage.
-Metal parts: no deformation or oxidation.
-Connector: Must be connected correctly.
To ensure that the seat belt is working properly.