DELTA 502118 horizontal fixed safety device

Horizontal Positioning Safety Rope
Product Model: EX118200A (5.02.118)
For your safety, please strictly follow the instructions for use, inspection, maintenance and storage. DELTAPLUS does not assume any responsibility for accidents directly or indirectly caused by the use of products not in accordance with the methods provided in this instruction. It is forbidden to use this device beyond the performance of the product.
Product description:
When workers are working on beams, trees and metal fences, personal protective equipment should be equipped with an operating positioning system. Use when the work requires stable operation positioning.
Instructions for use:
Connect the rope hook to the left buckle of the operating positioning belt, and connect the retractor to the other buckle (1) (opposite for left-handers). Wrap the rope on the building body (2), adjust the length and tension of the rope with a retractor to ensure a stable position and limit the user’s fall. The falling distance should not exceed 0.5 m (3). Stretch the rope (3A): the left (right) hand holds the rope between the right (left) hand side contractor and the building body, the right (left) hand holds and pulls the hand wheel of the contractor, the user’s body Lean back to let the rope loosen slowly, let go of the handwheel, and the tightener still locks the rope.
-Retractable rope (3B): Pull the free end of the rope on the other side of the retractor with your right (left) hand, and the user’s body is tilted toward the building body while pulling the rope to the building body.
Suggested method of use:
The device should be used by people who have been trained in working at heights. This device is a personal device and is for personal use only. When in use, the device should not be in contact with oils, acids, solvents, open flames, high-temperature metals or sharp objects. During use, the rope connector and the connector of the shrinker should be connected to the side rope loop of the positioning belt. The following situations are strictly prohibited: connect all connectors to the same belt buckle; connect the contractor or rope connector to a fixed point on the building body; connect the contractor connector to the belt buckle, The other connector is connected to the rope. Make sure that the connector is closed during use.
Inspection:
Before each use, carefully check the ropes, shrinkers and connectors to see if there is mechanical wear, chemical corrosion or thermal deformation. The device is tested by the person who will use it. Do not use if there is any damage or doubt. The device must be inspected annually by qualified technicians. Check all parts for mechanical wear, chemical corrosion or thermal deformation. The easy-to-use
operation positioning device does not include an anti-falling device and cannot be used as a high-altitude anti-falling device. The operating positioning device should be used in conjunction with the fall prevention system. The fall prevention system itself complies with some mandatory standards. (EN361-EN354-EN355-EN353-1/2-EN360-EN362) It is strictly forbidden to use the device in areas where explosions may occur. It is strictly prohibited to repair or modify the device by yourself. Clean the device with warm water and household soap for
maintenance and storage
; do not use acids or solvents for cleaning.
After cleaning, dry it outdoors, away from open flames and all heat sources. The device should be put away and put in the packaging during transportation to prevent moisture and mechanical and chemical damage.