DELTA 503060 operation positioning system

Product name: DELTA anti-fall brake
Product introduction: open sliding guide anti-fall brake, self-locking brake, equipped with steel O-hook, can be used with a positioning anchor rope with a diameter of 14-16 mm. Passed the fire inspection by the National Fire Equipment Quality Supervision and Inspection Center.
Product model: AN060 (5.03.060)
Overall features:
ASCORD 1 is a French-designed high-strength stainless steel, open sliding guide anti-fall brake. As the user moves up and down, it slides along a 3-strand polyamide rope with a diameter of 14 mm. This device is fully automatic, equipped with a force diffuser, and has a simple design that can ensure that the device is fixed on the rope.
Instructions for use:
The device is easy to open. Press down on the lock plate and pull the movable component outwards until the component leaves the notch, and then wind up.
Put the rope into the groove forming the main body of the device.
Push the movable component back into the notch to close the device. Push back the lock plate; the assembly will automatically return to its original position.
Use the safety hook to connect the device directly to the connectors on the front and back of the user’s safety belt. When in use, the rope slides in the groove, and a roller is installed in the groove to facilitate the rope to slide freely. When a fall accident occurs, the hinge rod presses the serrated cam, the cam clamps the rope at the bottom of the groove, and fixes the ASCORD on the rope to prevent the fall. The operator remained at the position before the accident.
Suggested use method:
-We recommend to equip each user with a set of ASCORD 1 anti-falling brake.
-The rope fixing point must be above the user, with a minimum breaking stress of 10kN.
-There should be at least 2.50 meters of space under the user’s feet.
-Avoid contact with sharp objects and corrosive substances.
-Please check the anti-falling brake carefully before each use. If in doubt, or if the device shows signs of corrosion or deformation, return the device to the manufacturer or its designated representative.
-Check to make sure the safety hook is working properly.
-It is forbidden to replace the parts of the anti-falling brake.