DELTA 505102 differential anti-fall brake

MINIBLOCK retractable speed difference arrester
Product model: AN102 (5.05.102)
Specification: 2.5 meters and 6 meters optional
Color: orange
Product description:
retractable speed difference arrester, equipped with cardan shaft, high-strength ABS The protective outer box, the width of the buffer belt is 46 mm. The maximum unfolded length is 2.6 meters.
Material:
Protective box: Plastic
Instructions:
This product is used in conjunction with a safety screw ring, one end is fixed to the fixed point, and the other end is connected to the user’s safety belt. Used for users to move around a fixed point. Suitable for work occasions such as scaffolding work and high-altitude glass cleaning. It is recommended to equip each user with a MINIBLOCK retractable speed difference anti-dropping device. Carefully check to ensure that the fixed point of the device is on the upper part of the user and that there will be no pendulum effect when a fall accident occurs. Minimum space: the distance between the buckle on the seat belt and the first obstacle that it touches is 2.6 meters. The device can only be used by one person at a time. Choose a fixed point that can bear at least 15kN. Check carefully to ensure that the fixing points are properly fixed and the normal deployment of the buffer belt will not be hindered. The user must fasten the seat belt safely at all times and correctly fasten the buffer belt to the safety harness. Check safety belts, safety hooks and shock-absorbing belts before each use. Avoid rust or contact with sharp objects. After a fall accident or every 12 months, return the product to the manufacturer or its designated representative for system inspection. It is strictly forbidden to replace the anti-falling brake parts.
Prohibited: It is
forbidden to use this product under circumstances other than those specified above. The device should avoid shaking during use.
Storage instructions:
Must be stored in a dry and ventilated environment.
Cleaning/maintenance instructions:
clean with water, wipe with a dry cloth, and hang in a ventilated place.
Performance:
This product complies with the design, production and testing methods specified in the European Directive 89/686 and EN360 standards. Product production strictly complies with EC quality assurance (Article 11B of Directive 89/686/EEC), and the following authorized agencies control and are responsible for product production: APAVE