DELTA 505123 differential anti-fall brake

Product name: DELTA (DELTA) anti-falling brake AN123 505123
Specifications: 10 meters and 6 meters, 15 meters optional
Product introduction:
2EHSDELTA (DELTA) anti-falling brake, AN123,505123, the most cost-effective, suitable for different working environments For various requirements, the automatic retractable anti-fall brake, high-strength ABS anti-rust outer box, can effectively resist impact and corrosion. With 1 AM002 steel O-hook,
this series device is used in conjunction with the safety hook, which is firmly connected to the fixed point and the operator’s safety belt.
We recommend that each user individually equip and use this series of anti-falling devices.
The fixed point of this series of devices must be located on the upper part of the user, with a minimum stress of 10kN.
Check carefully that in normal use, the deployment of the steel cable will not be hindered, and check whether there is enough space: there is at least 1.50 meters of space under the user’s feet.
Suggested method of use:
-We recommend placing this series of fall protectors vertically when using them.
-Ensure that in the event of a fall accident, this series of devices can prevent the user from falling continuously or swinging from side to side.
-It is forbidden to replace the parts of the anti-falling brake.
-Avoid rust and contact with sharp objects.
-When the wire rope is unfolded, it is recommended not to suddenly release the wire rope, but to wind it back to the anti-fall brake.
Inspection process:
This series of devices must be systematically inspected by the manufacturer or its designated representative, usually after a fall accident or every 12 months.
-Before each use, check the status of the seat belt and safety hook.
-Check the anti-falling brake before use to ensure that the steel cable can be normally deployed and rewound, the stop system can work normally, and the steel cable is not damaged.
-If in doubt, or if the device shows signs of corrosion or deformation, return the device to the manufacturer or its designated representative.
Easy to use: The
anti-falling brake is used in conjunction with the anti-falling system. The anti-falling system includes a seat belt, a connector and a fixed point.
Please read the instructions of each part of the system before use.
Maintenance and storage: (please strictly follow the instructions below)
wash with clean water, dry with a dry cloth, and hang it in a ventilated room to dry naturally. Avoid fire and heat, as do other parts that have been damp during use.
The anti-fall brake should be placed in a warm, dry, ventilated place. Keep away from all heat sources.