DELTA 506106 luxury safety belt

DELTA anti-fall safety belt+buffer belt+round hook+double rope
Brand: French Delta
product name: luxury anti-falling suit seat belt
model: 506106
color: brown
material: polyester polyester webbing
Function: Suspension operation, telecommunications operation, aerial operation, climbing operation
Packaging: 1 piece |bag
Accessories: With back D-ring, chest hanging point
Standard: EN361, EN354 standards
National regulations: all safety belts The sewing thread color of the product cannot be the same as the color of the belt, so it is convenient to check the degree of wear
(Delta safety series products can provide relevant test reports or related documents, production licenses)
Note:
1: Term: The estimated life of the seat belt is 5 years, but , The following factors may reduce product performance and shorten its service life: wrong storage, wrong use, fall protection, deformation, contact with chemicals (acids and alkalis) exposed to heat sources above 60 degrees;
2: hanging point inspection: minimum 10KN Whether the resistance is above the operator; whether the vertical position is within the range of the working surface (maximum angle +-30), is completely suitable for the fixture of the equipment, does not have any sharp, cutting edges
3: Save: water and Clean the seat belt with neutral soap. Do not use acids, solvents, or any solvents based on them. Allow the seat belt to dry in a well-ventilated area away from heat sources. Store the safety belt in a place away from moisture and ultraviolet rays,
avoid any corrosive air, and overheating or overcold environment;
4: Before using the safety hook, check whether there are any signs of deformation or wear, and the locking system is working normally. The safety hook has been used to protect against a fall. For safety, it must be returned for inspection.
Fall protection European standards:
EN353-1 Guided anti-fall brake-rigid guide rail and self-locking device
EN353-2 Guided anti-fall brake-flexible guide rail and self-locking device
EN354 tether (belt), metal chain, maximum length 2 meters; EN355 cushioning device
EN358 work positioning system EN360 automatic retractable fall arrester
EN361 full-body safety belt EN362 connector
EN363 anti-fall braking device EN795 anchor
EN341 landing device EN1496 life-saving lifting device
personal fall protection system basic components (anti-fall three Elements):
(1) Fixing points and connecting parts:
Fixing points (connecting slings, poles, tripods, etc.): must be firmly connected to the personal fall protection system, and its bearing capacity must be greater than 10KN and maintained for more than 3 minutes (EN795 -B) It must be located as high as possible to prevent workers from colliding with the ground or low-rise structures when they fall. Connectors (hooks, large-diameter safety hooks, etc.): connect the connecting system with the suspension point, and its bearing capacity must be greater than 15KN, and Maintain for more than 3 minutes (EN362).
(2) Fall brake system:
Connect the fall protection full-body safety belt with the hanging point or connector: (hanging rope, lifeline, etc.) can be divided into guided type, shock absorption type, self-locking speed difference type, etc. must be able to limit the fall And should be selected according to the working environment, the possible fall height should be calculated to confirm the required anti-fall system.
(3) Fall protection full-body safety belt:
Decomposes and transfers the force and energy generated during a fall, and protects: human body safety. The full-body safety belt is the only product suitable for fall braking. Choose the appropriate safety belt according to the type of work and the environment. The bearing capacity of all metal hanging points must be greater than 15KN and maintained for more than 3 minutes (EN361 and EN358).