The protective clothing made of Tyvek non-woven fabric developed by DUPONT has the characteristics of high strength, good elasticity, durability and comfortable wearing.
TYVEK sets an example of the industrial standard of protective clothing-achieving the best balance between protection, durability and comfort.
From general maintenance to food processing, to handling lead, silica or asbestos, TYVEK is very suitable.
TYVEK has a protective function and does not require lamination or filming. It can block particles visible under the microscope even after wear.
In fact, in third-party protective clothing testing, it has been proved that TYVEK is twice as durable as other fabrics.
At DUPONT, we believe that the comfort of protective clothing is also very important. If protective clothing cannot “breathe”,
it will have a negative impact on workers’ creativity and job satisfaction.
TYVEK is permeable to air and water vapor and can “breathe”. And it is very light, soft and comfortable.
You can have everything at the same timeprotection, comfort and durability, so why bother
* Excellent protection performance
* Excellent durability performance
* Excellent air permeability
Excellent comfort performance TYVEK Tyvek *It has a good internal barrier function for dry dust, suspension and light splashing liquid.
*The scope of application is from Agriculture to painting and anti-lead, asbestos
* Even after being worn, it can block dust better than other reusable protective clothing
* The best balance between protection, durability and comfort
TYVEK Dust protection performance, particle size
test concentration (pieces/liter),
penetration (particles/min/m2/1000 particles) 1.0 micron-1.5 micron 47 042 1 1.5 micron-2.0 micron 10 384 2 >2.0 micron 7 054 0
technology Data performance
basis weight ISO 536 41 g/m2
thickness EN 20534 130 micron
tongue tear strength MD/XD ISO 9073-4 26.1/30.6
Newton burst strength ISO 2960 (50 Cm) 108 kPa
puncture strength PrEN 863 10.8 N hydrostatic head (per cm of water pressure)
anti-wear and dust removal performance ISO 811EN 530 (method 2) BS 6909:1988 (Shiley method 21) 120 cm 100
cycles pass level:
excellent high temperature Exposure-Melting point is 135 Low temperature exposure–73 Flexibility reduces
surface resistance Humidity 25% EN 1149-1 4.8 ohms (on both sides)
air penetration ISO 5636-5 20 seconds water vapor penetration ASTM E398 1700 g/square Meter 24 hours
protection life 10 years accelerated aging test, can not be stored in direct sunlight MD = machine direction XD = vertical direction
TYVEK Tyvek asbestos fiber protection performance DUPONT testing method
fiber size. Fiber average value (fiber number / square Mm)
Average protection factor (%) The average length of all fibers is longer than 0 microns 41 558 99.08 >0.5 microns 36 584 99.18
Tyvek primary protective clothing size selection table
Size ——- Bust (cm)-Bust (inch) ——Height (cm)–Height (inch)
XL——– 108-116——42″-45″———180-188—– 5.9′-6.2′