PPE

Half of the unsafe production enterprises in Shanxi Province have been exposed

Taiyuan, March 12 (reporter Xu Jiangfan) according to the results of product quality spot check in the fourth quarter of last year just released by Shanxi Provincial Bureau of quality supervision, half of the safety helmets in use on construction sites are unqualified, and there are major safety hazards

the spot check of safety helmets in use at construction sites covered 17 users, a total of 20 batches, and the qualified rate of sampling was only 50%. The unqualified items include quality, vertical distance, protrusion in cap and shell, impact resistance, etc. These unqualified safety helmets can not only easily cause neck fatigue and injury to cervical vertebra, but also cause injury and suffocation of operators

the main unqualified products and enterprises are as follows: the glass fiber reinforced plastic Tian’an safety helmet used and marked by Shougang Changzhi 1ron and Steel Co., Ltd. is produced by Anhui Tianchang Tian’an protective articles Co., Ltd., and its quality items do not meet the standard requirements

the 53cm-62cm plastic Jixiang safety helmet used by Shanxi Hongsheng Coking Coal Co., Ltd. and produced by Hebei Langfang Jiahui plastic products Co., Ltd. does not meet the vertical spacing requirements of the standard

the ordinary FRP X-1 flying man safety helmet used by China Construction Third Engineering Bureau (Xinghewan project department) and marked by Beijing flying man science and Trade Co., Ltd. does not meet the requirements of the standard

the impact resistance and absorption performance of the Y-type safety helmet, which is distributed by Jiayi Material Distribution Department of Taiyuan Jinyuan District and produced by Hebei Cixian Hongfa labor protection plastic products Co., Ltd., does not meet the standard requirements

the 540mm-650mm (plastic) Su Dian star safety helmet used by Shanxi sunshine Power Generation Co., Ltd. and produced by Xuzhou riyuexing Plastic 1ndustry Co., Ltd. does not meet the requirements of the standard in terms of jaw belt strength and vertical spacing

the 660 coal mine is used by Changzhi Jingfang Coal 1ndustry Co., Ltd. and produced by Henan Yuguang Gold Aluminum Group Co., Ltd × four hundred and eighty × 440 safety helmet, its lateral rigidity does not meet the standard requirements

Back to list