PPE

Key points of supervision for work at height

1. Check the construction personnel

(1) clothing

clothing: there should be special work clothes and buttons, so that the clothes are close to the body and light, not too loose and elegant

shoes: slippers or barefoot operation are not allowed, and soft soled anti-skid shoes are required for high altitude operation< (2) physical and mental status the physical conditions of the workers working at height should meet the safety requirements. For example, it is not allowed to engage in work at height for those who are not suitable for work at height, such as hypertension, heart disease, anemia, epilepsy, etc; The personnel with excessive fatigue, low spirit and low mood should stop working at height; 1t is strictly forbidden to work at height after drinking2. Check the safety protection equipment (1) safety helmet whether the shell, lining and strap of safety helmet are complete and effective the safety helmet should be worn tightly and correctly, and the headband should be tied under the jaw if necessary, check the validity period and certificate of safety helmet whether the safety helmet has been used for other purposes< (2) safety belt should be worn when working in the following situations: (1) safety belt should be worn when entering the workplace when working at height is possible (2) working at height of more than two meters (3) operation on sloping roof (4) flat roof, when there is no protective fence within 1.2 meters from the roof edge or roof opening (5) any suspended platform or worktable (6) any guardrail or scaffold with incomplete planking (7) on the ladder near the roof or floor opening (8) when there is no reliable fall prevention measures for work at height correctly use the safety belt: (1) to tighten the belt, the waist buckle assembly must be fastened and fastened (2) when the safety belt is used for hanging operation, the hook should not be directly hooked on the safety belt rope, but should be hooked on the hanging ring of the safety belt rope (3) it is forbidden to hang the safety belt on the component with weak or sharp angle (4) if the same type of seat belt is used, all parts cannot be replaced without authorization (5) the seat belt which has been seriously impacted can not be used even if its appearance has not changed (6) it is strictly forbidden to use safety belt to transfer heavy objects (7) the safety belt should be hung at a firm and reliable place above, and the height should not be lower than the waist 3. Check the construction operation mainly check whether the construction personnel have “three violations” in the construction process 4. Check whether the construction materials are stacked in disorder 4 whether the construction waste has been cleaned up in time is there any dangerous material under the work at height 5. Safe use of ladder 6. Safe use of scaffold facilities 7. Correct use of operation platform our website solemnly declares: This article is reproduced by 1nternet media, only represents the author’s point of view, and has nothing to do with this website. 1f the information column articles and comments violate your legal rights, please call to let us know and we will deal with them in time

Back to list