Lakeland OSX-AC top fire fighting suit

Lakeland OSX-AC top fire fighting suit 1
, 35 inches long, three-piece tailored design.
2. The seam is made with 8-10 stitches/inch and double stitches.
3. All hardware parts are reinforced with die-cut leather.
4. The inner lining is sealed on the top with Velcro and snap button.
5. The neck buckle adopts a surrounding design, which can be well connected with helmets, shields, and air breathing apparatus masks.
6. There is a hanger ring on the back of the collar.
7. Add a heat protection lining to the shoulders to increase heat release performance.
8. Two-piece curved sleeve tube designed according to the arm’s moving range and ergonomic principles.
9. The design of the triangle piece under the armpit prevents the top from being pulled up.
10. Deep double-layer neoprene cuffs.
11. The gray Arashield cuffs are strengthened and double needle sewing.
12. The 4-inch NOMEX knitted wrist brace can maintain a good original shape.
OSX Attack fully surpasses the latest fire protection certification of the National Fire Protection Association NFPA1971-2007. The whole set of fire protection suits is flame retardant, heat resistant and moisture resistant.
The main parameters of OSX Attack fire suit: heat resistance 700 degrees Celsius; TPP=240.6; THL=40.4;
CCHR<8%. (The above data are based on NFPA test conditions and methods).
The complete set includes a red nylon storage bag (PKG-15) that can be loaded into a complete set of firefighting suits and a red connecting strap 136R.
The outer layer of the fabric is yellow Nomex-flame-retardant and abrasion resistant, the middle layer is a moisture-proof barrier: STEDAIR 3000-flame retardant, moisture-proof and breathable at the same time; the inner layer is a heat-insulating layer: Aralite-flame-retardant and heat insulation.
The inner lining is detachable, and the back is equipped with a unique DRD emergency rescue strap.