Performance parameters of safety belt

Safety belt is the protective equipment for workers working at height to prevent falling casualties. 1t is composed of belt, rope and metal accessories, which is generally called safety belt< According to the national standard GB 6095-85, the safety belt is mainly divided into girth type and suspension type (our company uses suspension type). The technical requirements of suspension type safety belt mainly include: ? the safety belt and rope must be made of nylon, vinylon and silk ? leather, light leather, vinylon or rubber are used to wrap the rope ? the belt must be a whole one, with a width of 40 ~ 50mm and a length of 1300 ~ 1600mm the damage load of safety belt, belt rope and metal accessories must be inspected in accordance with the relevant provisions of GB 6096-85 safety belt inspection methods ? the width of the belt is not less than 80mm, and the length is 600 ~ 700mm. The outer layer is wrapped with ribbon or light leather, and the edge is smooth without angle ? the color of the ribbon is mainly dark green, grass green, orange red, dark yellow, followed by white, etc ? the diameter of safety rope shall not be less than 13mm ? the metal hook must have a safety device ? the surface of metal fittings shall be smooth without pitting and cracks; The edge is arc-shaped; The surface must be rust proof. Parts that do not meet the above requirements are not allowed to be installed ? the ring, half ring, triangle ring, 8-ring, crystal ring and three-way joint of metal fittings are not allowed to be welded, and the edges are in circular arc. Only butt welding is allowed for adjusting ring this article is a reprint of 1nternet media, which only represents the author’s point of view and has nothing to do with this website. 1f the information column articles and comments violate your legal rights, please call to let us know and we will deal with them in time