RWD WJH0959B stainless steel vertical eyewash

RWD WJH0959B Stainless steel vertical eyewash device with dust cover.
Eyewash WJH0959B performance parameters
nominal operating pressure sealed pressure wash flow L / min Conditions
0.4MPA 0.45MPA 0.20 ~ 0.40MPA 11.4 water or ordinary temperature water hygienic
eyewash WJH0959B performance parameters
nominal operating pressure sealed pressure wash flow L /min Applicable conditions
0.4MPA 0.45MPA 0.20~0.40MPA 11.4 Normal temperature pure water or water that meets sanitary standards
WJH0959B Main performance
1. Use ball valve to control eyewash switch. Convenient operation, fast opening and closing, and reliable sealing.
2. Eyewash nozzle: It is made of ABS material and copper inserts. It has a bubbler built in and a dust cover on it. It can usually be dustproof. It can be washed away by water at any time during use and reduces the short-term High water pressure to avoid eye injury.
3. Sin eye seepage conduit provided with holes for emptying the residual water wash nozzles, facilitates (a part of water therefrom into the hole when the wash water does not affect the results) and freeze clean line
304 stainless steel main material , Surface high-brightness polished
eyewasher WJH0959B installation requirements
1. The product model, certificate, instruction manual, and packing list must be rechecked before installation.
2. The installation location should be within 15 meters of the accident-prone place, and the flushing place can be reached within 10 seconds of running speed.
3. Before installation, please rinse off the impurities in the water inlet pipe.
4. Assemble the components as shown in the figure. The threaded connection of each component needs to be wrapped with sealing tape (such as PTFE tape), and the water pipes are connected according to the diameter of the inlet and outlet.
5. After connecting the inlet and drain pipes, check whether the ball valve switch is flexibly in place and whether there is jamming.