STG801006 Above-ground automatic emptying antifreeze stainless steel composite eyewash
1. Product introduction
The eyewash has the function of automatically emptying the water inside the eyewash to achieve the purpose of antifreeze. The equipment is made of stainless steel SS304, which can resist acid, alkali, Corrosion of salt and oil chemical substances, equipped with spray part and eyewash part, directly installed on the ground of the factory site, connected to drinking tap water; when chemical substances are sprayed on the eyes, face or other parts of the staff , Turn on the spray switch of the compound eyewash, and rinse the body or clothing with large amounts of water, or open the eyewash part to rinse the injured eyes and face with large amounts of water. The washing time> 15 minutes; the spray water flow:> 75.7 L/MIN, eyewash/face wash water flow rate:> 11.4L/MIN, eye wash water flow rate:> 1.5L/MIN.
Special attention:
A. The above-ground automatic emptying antifreeze eyewash is suitable for use in areas where the depth of the frozen soil layer is less than 500MM in winter, such as: East China, Central China, etc.
B. The buried automatic emptying antifreeze eyewash is suitable for use in areas where the depth of the frozen soil layer is greater than 500MM in winter, such as: North China, Northeast and Northwest regions, etc.
Eyewash standard:
American eyewash standard ANSI/ISEA Z358. 1 2014 Emergency Eyewash and Shower Standard
European eyewash standard EN 15154:1/2 2006 and 15154:3/4 2009 Emergency Eyewash and Shower Standard
Australian eyewash standard AS4775-2007 Emergency Eyewash and Shower Standard
optional configuration: The eyewash can be configured Sound and light alarm, explosion-proof lighting, connection to DCS, timing drainage device, waste water collection enclosure and water curtain, etc.
2.
There is fixed drinking tap water at the application site. If there is no fixed water source, you should choose a portable eyewash.
Water source pressure requirement: 0.2 ~0.6 MPa. If the water supply pressure is lower than the above pressure, the customer needs to inform STGSTG. When STGSTG produces the eyewash, it will modify the internal structure of the eyewash to meet the technical requirements of
the eyewash standard. The eyewash is made of stainless steel 304. It is resistant to the corrosion of acids, alkalis, salts and oil chemicals, but it cannot resist the corrosion of chemicals such as CL-, F-, sulfuric acid and oxalic acid with a concentration of more than 50%.
The eyewash has the function of antifreeze, and is suitable for use in areas where the ambient temperature is higher than -5C.
Use water temperature: 16~38. (The water source temperature value is solved by the on-site water supply) It is
directly installed on the ground, floor steel plate or floor grille plate of the work site.
Products are widely used in petroleum, chemical, electronics, electric power, ports and pharmaceutical industries.
Third, the performance characteristics:
eyewash is in the standby state, there is no wash water conduit is
at end of eyewash, eyewash automatic emptying the water inside, to prevent freezing affect eyewash using
suitable In areas where the ambient temperature is higher than -5C in winter, use an
anti-freeze device to install inside the eyewash pipe, which will not be damaged by humans. It is
suitable for areas where the depth of the frozen soil layer is
less than 500mm in winter. The water inlet is above the ground
. Made of 304 material, it can resist the corrosion of acid, alkali, salt and oil chemical substances, but can not resist the corrosion of CL-, F-, sulfuric acid and the concentration of more than 50% oxalic acid.
Equipped with spray system and eyewash system , It can not only wash the face and eyes, but also wash the chemical substances on the body and clothing. Install directly on the ground of the work site. Connect drinking tap water using
pipe fitting material SS304, pipe fitting thickness: 3.0mm, pipe fitting thread: NPT
water inlet Size: 1-1/4 inch FNPT, the size can be adjusted according to the customer site.
Outlet size: 1-1/4 inch FNPT, this size can be adjusted according to customer site.
Spray water flow rate:> 75.7 L / MIN
wash water flow rate:> 1.5 L / MIN
eyewash / water wash flow rate:> 11.4 L / MIN
washing time:> 15 MIN
water pressure requirements: 0.2 ~ 0.6 MPa
push-handle attached to the luminescent The nameplate is
equipped with an eyewash device and it is luminous and safe.
4. Installation requirements: The
general principle is to
install near the hazardous work area, generally 10 or 15 meters away.
The time to reach the eyewash in a straight line should not exceed 10 seconds . The
eyewash
must be connected to drinking tap water.
Use water pressure of 0.2~0.6MPa
within the radius of 2 meters of the eyewash, and no non-explosion-proof electrical switch.
Specific installation
According to the installation hole size of the eyewash base, drill 3–10mm where the eyewash needs to be installed hole
according eyewash drawings, step by step assembly eyewash
the assembled eyewash mounted to a predetermined position, the expansion screw eyewash
connected intake: 1-1 / 4 inches FNPT
connection outlet: 1-1 / 4 Inch FNPT
5. Operating instructions:
Open the eyewash valve by gently pushing the eyewash handle by hand, and the eyewash water will be automatically sprayed from the eyewash system; after use, reset the eyewash handle to close the eyewash ball valve and automatically drain the water in the eyewash part , And reset the dust cover.
Gently pull the spray handle to open the spray ball valve, and the spray water will automatically spray from the sprinkler head; after use, reset the spray handle to close the spray ball valve and automatically drain the water in the spray part .
STG801006 Above-ground automatic emptying antifreeze stainless steel composite eyewash
Model: 801006
SKU:
PL007060
Category: Vertical Eyewash
Description
Additional information
Brand |
STG |
---|
Reviews (0)
Be the first to review “STG801006 Above-ground automatic emptying antifreeze stainless steel composite eyewash” Cancel reply
You must be logged in to post a review.
Reviews
There are no reviews yet.