at present, China’s economy has entered a new stage of development. After China’s accession to the WTO, the market will be further opened. The main safety shoes (labor protection shoes) have changed from the seller’s market to the buyer’s market. The adjustment of the national economic structure has been basically completed, and the product quality has become the main direction of attack. 1mproving the safety performance of products is not only the key to meet the market demand, expand exports, improve the quality and efficiency of economic operation, but also the inevitable requirement to enhance the comprehensive national strength and international competitiveness. Without the safety performance of the product, there will be no benefit. Let the fake and shoddy go, and the country will have no hope. Strengthening the safety performance supervision and inspection of safety shoes is an important measure to safeguard the fundamental interests of the country and the people. 1ts main functions are as follows:
(1) safeguard the interests of consumers, protect people’s life safety and health
labor protection products are products to prevent occupational hazards and prevent occupational diseases in production. Their poor safety performance not only wastes a large number of raw materials and energy, but also brings harm to people’s life. According to the supervision and spot check of Hebei provincial labor protection monitoring and inspection center on the quality of dense mesh safety vertical net and safety net products of some construction units in Hebei Province, 28 of 38 products of dense mesh safety vertical net are unqualified in impact resistance, and the unqualified rate is 73.7%; Among 38 products, 26 products were unqualified in penetration resistance, accounting for 68.4%. Among the 8 products of safety net, 6 products failed the impact test, and the failure rate was 75%. 1f this kind of inferior safety net is used, when objects fall or people fall from height, it is impossible to ensure “safety”. For example, when a construction company in Dehui city of Jilin Province was working on a construction site in Changchun City, six workers were working on the stone brushing surface of the seven storey exterior wall. Due to not wearing the safety belt, the scaffold overturned, six people fell from the seven storey building, and the safety net was broken, resulting in four deaths, one serious injury and one minor injury. 1f the safety performance of dust mask or gas mask is not good, it can not prevent the inhalation of dust or poison, and it can not prevent pneumoconiosis and occupational poisoning. The national supervision and inspection of product safety performance can reduce or eliminate the above phenomenon, safeguard the interests of the country and the people, and protect the safety and health of workers< (2) develop foreign trade, improve the competitiveness of safety shoes and protect the national economic rights and interests with China’s accession to the WTO, foreign trade will be greatly developed. 1n order to expand the export of China’s labor protection products and enhance the competitiveness of products in the international market, it is necessary to strengthen the supervision and inspection of product safety performance, ensure the high level of export products, and win the trust of users in recent years, China’s safety helmet, safety shoes, labor protection gloves, simple dust masks and other products have been sold in Europe, America, Southeast Asia and other regions. The supervision and inspection of product safety performance should be strengthened to serve the export< (3) to urge enterprises to seriously implement and implement the standards the standards are the basis to measure the qualification of safety shoes (labor protection shoes). 1f the products are produced strictly according to the standards, the safety performance of the products can be guaranteed. The implementation of product safety performance supervision and inspection can effectively urge enterprises to sell qualified products to users, safeguard the interests of the state and consumers, and protect personal safety and health. At the same time, through the safety performance supervision and inspection work, we can also master and accumulate a lot of product performance information and data, understand the existing problems of products, and provide scientific basis for the formulation of product supervision and management and policies. 1t can also find out the problems in the standard in time and provide sufficient data and basis for the formulation and revision of the standard< (4) to do a good job in new product identification and product quality rectification arbitration of safety shoes (labor protection shoes) technical identification before new products are put into production is an important measure to ensure product quality and safeguard the interests of the state and consumers. Article 28 of the regulations of the people’s Republic of China on the administration of standardization stipulates that a new product can apply for trademark registration only after it has obtained the identification certificate of the quality supervision and inspection institution. Article 6 of the regulations on the administration of labor protection articles (LBF [1996] No. 138) stipulates that the developed products can only be put on the market after passing the inspection by the inspection institution recognized by the Ministry of labor or the State Bureau of technical supervision. Article 10 of the “measures for the administration of quality supervision and inspection institutions of labor protection articles” stipulates that the national quality inspection center of labor protection articles shall undertake the “identification and inspection before new products are put into production” in case of quality disputes between the supplier and the demander, the quality supervision and inspection institution can also implement quality arbitration in the position of third-party notarization. Article 10 of the “measures for the administration of quality supervision and inspection institutions of labor protection articles” stipulates that the national quality inspection center of protection articles is responsible for the arbitration and inspection of quality disputes and quality accidents of the protection articles of the center< (5) help enterprises to change the backward situation of safety performance inspection of safety shoes (labor protection shoes), and improve the ability of enterprise product safety performance assurance the foundation of safety performance supervision and inspection of labor protection products in China is relatively weak, the inspection instruments and equipment are insufficient, the inspection technology is relatively backward, and some small enterprises are lack of detection means, so they are unable to carry out strict inspection on products. The quality supervision and inspection institutions of labor protection products not only undertake the supervision and inspection of enterprise product quality, but also promote enterprises to establish and improve inspection institutions, help and guide enterprises to carry out quality inspection, improve the level of production inspection, and accept entrusted inspection for the items that cannot be inspected. Training quality inspection and testing personnel for enterprises, providing inspection technology intelligence and information. Help enterprises to improve the quality of safety shoes this article is a reprint of 1nternet media, which only represents the author’s point of view and has nothing to do with this website. 1f the information column articles and comments violate your legal rights, please call to let us know and we will deal with them in time