PPE

Standard rules of labor protection equipment

1n order to guide the employing units to reasonably equip and correctly use labor protection articles, protect the safety and health of workers in the production process, and ensure safe production, the State Economic and Trade Commission, in accordance with the labor law of the people’s Republic of China, has organized and formulated the standard for the allocation of labor protection articles (Trial 1mplementation), which should be seriously implemented< This standard is formulated in accordance with the labor law of the people's Republic of China and other relevant laws and regulations to further strengthen the management of labor protection articles and ensure the safety and health of workers in the process of labor2. This standard is applicable to all enterprises, institutions and individual economic organizations within the territory of the people's Republic of China the labor protection articles specified in this standard refer to the necessary articles provided by the employer in order to protect the safety and health of workers in the process of labor. The employer should guide and urge the workers to use it correctly during the operation< Third, the State implements the safety production license system for special labor protection articles. The special labor protection articles purchased, issued and used by the employing unit must have the safety production license, product qualification certificate and safety appraisal certificate< 4. The employer should establish and improve the management system for the purchase, acceptance, storage, distribution, use, replacement and scrapping of labor protection articles. The safety technology department shall check and accept the purchased labor protection articles< 5. This standard refers to the catalogue of classification of work types of the people's Republic of China, and 116 types of work are selected as typical types of work. The allocation of labor protection articles for other types of work can be determined by referring to Appendix B comparison table of similar types of work. For example, if the standard of labor protection articles for oil tanker cleaners is found in Appendix B, the similar type of work with serial number 3 "gas station operators" should be determined by referring to the standard of "gas station operators"< This standard refers to the national standard gb1165189 "rules for selection of labor protection articles". According to the working environment and working conditions of each type of work, labor protection articles with corresponding safety and hygiene performance are provided, which are indicated by letters indicating various protection properties (such as CC, FG, HW, etc., see Appendix A "letter comparison table of protection performance" for details). The material, style and color of the work clothes in the standard must meet the requirements of the operation safety of the relevant types of work< 7. Personnel engaged in various operations or working in various working environments should be equipped with labor protection appliances according to their main types of work and working environment. 1f the labor protection articles are not suitable for other types of work or in other working environment, other labor protection articles shall be provided or borrowed< 8. This standard requires some workers to be equipped with dust masks. Gauze masks should not be used as dust masks< 9. The distribution of anti-virus protective equipment should be based on the types of poisons that the operators may be exposed to, and the corresponding filter tank (box) should be accurately selected. Before each use, it should be carefully checked whether it is effective, and the filter tank (box) should be replaced regularly according to the national standards< 10. Gloves made of canvas, yarn, velvet, leather, rubber, plastic, latex and other materials are collectively referred to as "labor protection gloves" in this standard. The employer shall provide gloves with different protective properties and materials according to the actual needs of workers in preventing cutting, grinding, burning, scalding, freezing, electric shock, static electricity, corrosion, immersion and other injuries< 11. "Hearing protectors" in this standard are collectively referred to as earplugs, earmuffs and anti noise helmets. The employer can provide workers with hearing protectors according to the intensity and frequency of noise in the workplace< 1n addition to the regular replacement of insulating gloves and shoes, the insulation performance should be checked before each use and retested every six months< 13. For the type of work that may be injured by the splashing of debris such as iron chips, the use of ordinary glass lenses is fragile after impact, which may cause indirect injury to the eyes of the wearer. Therefore, anti impact glasses must be worn< 14. Relevant personnel such as production management, dispatching, security, safety inspection, internship and foreign visitors should be equipped with corresponding labor protection appliances according to the production area they often enter< When the production equipment is damaged or invalid, in the workplace where toxic and harmful gas may leak, in addition to the conventional labor protection equipment, the necessary anti-virus protective equipment should be placed at the eye-catching place on the site for emergency use. The employer should also have special personnel and special measures to protect them in a good state< 16. Safety nets must be set up in construction, bridge, ship, industrial installation and other places at height according to the regulations, and the operators should choose and wear the corresponding types of safety belts according to the different working conditions 17. Considering that a type of work may have different working environment, different actual working hours and different labor intensity in different enterprises, as well as the differences of climate, environment and economic conditions in different provinces and cities, this standard sets the minimum standard for the types of labor protection articles for each type of work, but does not specify the service life of labor protection articles, When the provincial comprehensive management department of work safety formulates the provincial equipment standards, it shall issue additional necessary labor protection articles according to the actual situation, and specify the service life< 18. For the type of work not listed in this standard, the provincial comprehensive management department of work safety should equip the labor protection articles according to the actual situation when formulating the provincial equipment standard.

Back to list