PPE

The safety belt for working at height should be hung high and used low

1n the construction site, it seems to be a small problem where the safety belt is hung, but there is a profound truth in the small problem, which is related to the lives of the operators. The correct method should pay attention to the following points:

first, hang high and use low. High hanging, that is, the safety belt is hung at a place higher than the person standing; Low use, that is, the place where people work should be lower than the position where the safety belt is hung. According to this method, in case of falling accident, the combined force of safety belt, safety rope and metal accessories can pull the personnel to reduce the actual impact distance or prevent them from falling. On the contrary, low hanging and high using. 1n this case, when the fall occurs, the actual impact distance will increase, and the person and the rope will be subject to greater impact load, which will increase the degree of collision and fall

Second, it should be tied to a solid component or object to prevent swing or collision. The rope can’t be tied and the hook should be hung on the connecting ring< 3. 1f there is no fixed hanging place, wire rope with enough strength should be installed or other reliable methods should be adopted. 1t is forbidden to hang the safety belt on movable objects, or on objects with sharp edges or weak edges copyright notice: This article is reproduced by 1nternet media, only representing the author’s point of view, and has nothing to do with this website. 1f the information column articles and comments violate your legal rights, please call to let us know and we will deal with them in time

Back to list