Gloves are the most commonly used labor protection articles for employees. According to the type of operation, there are many kinds of gloves. For the third shift in the cold zone of line 2 in the finished product processing Department of Baotou steel rail beam plant, thread gloves, rubber waterproof gloves, leather gloves and anti cutting gloves are often used
the workers in the third shift of the cold zone of line 2 in the finished product processing Department of the rail and beam plant found that since the beginning of 2016, only the marked posts in the cold zone need to receive 30 pairs of gloves and a number of other types of gloves every month. 1n the past year, with the improvement of production, the acceleration of production rhythm and the increase of on-site workload, the number of gloves received by the post personnel each month has gradually increased to 45 pairs. Even so, sometimes there will be insufficient use of thread gloves, often need to apply for additional rubber gloves. With the help of the foreman of the shift and the employees of various positions in the region, the employees of the third shift in the cold zone of line 2 in the finished product processing Department of the rail and beam plant investigated and analyzed the use of different types of gloves. 1t was found that the quality inspection post used two pairs of gloves per shift on average, and the warehousing post used one pair of gloves per shift on average, On average, four pairs of rubber gloves and four pairs of anti cutting gloves are used in each shift of the grinding post, and three pairs of thread gloves are used in each shift of the marking post. The team consumes 60 to 70 pairs of gloves each month
after further analysis, the staff in class C found that the gloves in the quality inspection post were scrapped because the gloves were covered with oil marks and the powder produced by grinding the strip steel, which easily affected the inspection effect after blackening, so they were generally no longer used. The main reasons for the scrapping of gloves in warehousing, marking and grinding positions are the consumption and wear of oil marks, glue marks, iron filings of grinding wheel grinding machine, cutting of profile steel burr and chain lubricating oil, resulting in the scrapping of gloves. For this reason, the third shift of the cold zone of line 2 of the finished product processing Department of the rail and beam plant carried out “brainstorming” and came up with the idea of “glove reuse”: Although the gloves discarded by the quality inspection post are black, as long as there is no oil, they can be used by the identification, grinding and warehousing posts. Since then, only the staff of the quality inspection post have used new gloves, while the gloves used by the quality inspection post have been polished and stored in the warehouse. The gloves will not be scrapped until they can not be used, so as to maximize the use efficiency of the gloves. After practice, the average usage of gloves per shift in the third shift of cold zone of line 2 in the finished product processing Department of rail and beam plant is still two pairs, but the average usage of gloves per shift in other related posts is close to 0, so the consumption of gloves per month in the team is reduced to about 30 pairs. According t2.3 yuan per pair of gloves, a team can save 211.6 yuan a month and 2539.2 yuan a year. According to this calculation, the four teams in the cold zone of line 2 in the finished product processing Department of the rail and beam plant can save 10156.8 yuan per year
nowadays, the employees of class C in the cold zone of line 2 of the finished product processing Department of the rail and beam plant have a new understanding of the cost reduction of their posts: work still needs to be done, labor protection appliances also need to be used, and they also need to know how to use them skillfully. Even an insignificant pair of thread gloves can not be wasted casually. As long as the heart to find, there must be room to reduce costs