There is no inspection standard for safety helmet liner and other accessories

The state has implemented the production license system for the management of special labor protection articles, that is, the production enterprise of special labor protection articles must go through the national labor protection articles production license management office to test the production capacity, technical conditions and products of the enterprise. Only after the production license, the enterprise can produce and put the qualified products into the factory for sale. According to the batch size, a certain quantity of each batch of products must be taken out for the detection of six items, namely, impact absorption performance, puncture resistance, electrical insulation performance, flame retardant performance, direction finding rigidity and antistatic performance. All the detection is the identification of the overall test of the safety helmet, not the identification of a certain part< The national standard gb2811-89 has specific provisions on the material selection and material quality of each part of the safety helmet, but there is no testing standard, so it is impossible to test whether the safety helmet lining is qualified or not, and it is impossible to guarantee that the replaced safety helmet lining itself is a qualified product the overall quality of the safety helmet has not been tested after replacing the helmet liner the safety helmet is operated by the workers themselves during the process of replacing the helmet liner, and the horizontal and vertical distance between the helmet liner and the cap shell cannot be guaranteed. 1n addition, the user has no testing equipment, so it is uncertain whether the overall quality of the safety helmet can meet the standard after replacing the helmet liner whether it can cause the safety helmet to be used beyond the time limit because after replacing the helmet liner, the user will have the understanding that the safety helmet can continue to be used as long as it is not damaged. Who knows, the safety helmet shell will age with time under the wind, rain and sun. According to the national standard, the plastic safety helmet can only be used for two and a half years from the date of production. 1f it is used beyond the time limit, the safety helmet will become an accident helmet, and once it is hit by falling objects, it will cause great disaster. Therefore, it is suggested that “it is strictly forbidden to change the helmet liner or accessories at will” should be added when revising the safety helmet standard in the future, and the quality of the helmet liner should be required to ensure that the helmet liner will not be damaged during the service life copyright notice: This article is reproduced by 1nternet media, only representing the author’s point of view, and has nothing to do with China labor insurance network. 1f the information column articles and comments violate your legal rights, please call to let us know and we will deal with them in time

Back to list